Tile Roof Mounting

Landpower Solar Panel Tile Roof Mounting System is engineered for the maximum flexibility possible in designing and planning for various tile roof solar system installation. It is applicable to install the usual module to flush with the pitched roof. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and various hooks our Tile Roof Mounting makes the installation easy and quick to save your labor cost and time.

TECHNICAL INFORMATION
Install site :Tile Roof
Tilt Angle :Flushed with the roof (10~60 deg)
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Color: Natural or Customized
Anticorrosive: anodized aluminum & stainless steel

Warranty:Ten years warranty and twenty-year service life



COMPONENT OVERVIEW


Landpower carries many Components for various tile roof racking solutions,here are some main components:


                                   

        Roof Rail                 Thin Film Mid Clamp       Thin Film End Clamp            Mid Clamp                End Clamp


                     

               Splice                           Roof Hook                   Earthing Lug                 Earthing Clip                Cable Clip


    Note: The component is not limited as above, we carry high range of tile roof racking component for various tile roof,if you can't find components above,please feel free to contact us for more details.



GROUNDING SYSTEMS


The grounding systems include components like earthing lug, earthing clip and bonding jumper etc which makes the solar array more safe.





BENEFITS


1, Fast Installation.
The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and roof hook to guarantee a fast and easy installation process.
2, Flexible Application
The high range of engineered roof hooks and other holding devices ensure the mounting structure fit diverse roof tile and load situations. Both crystalline module and thin film module can easily be installed on most kind of tile roofs in landscape or portrait.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan:

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.


We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Metal Roof Mounting

Landpower Solar Panel Metal Roof Solar Mounting System is engineered for the maximum flexibility possible in designing and planning for various Corrugated,Trapezoidal metal/pvc roof solar system installation. It is applicable to install the usual module to flush with the pitched roof. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and various holding devices (like hanger bolt and L bracket etc.) our Metal Roof Mounting makes the installation easy and quick to save your labor cost and time.

TECHNICAL INFORMATION
Install site :Pitched Roof
Tilt Angle :Flushed with the roof (10~60 deg)
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Color: Natural or Customized
Anticorrosive: anodized aluminum & stainless steel
Warranty:Ten years warranty and twenty- year service life


COMPONENT OVERVIEW


Landpower carries various Components for various Corrugated,Trapezoidal metal/pvc Roof Racking Systems, here are some main components:


                    

          Roof Rail                Thin Film Mid Clamp    Thin Film End Clamp         Mid Clamp            End Clamp


         

            Splice                              L- Feet                   Earthing Lug              Earthing Clip                 Cable Clip


Note: The component is not limited as above, we carry high range of various Corrugated,Trapezoidal metal/pvc roof racking component for various metal roof,if you can't find components above,please feel free to contact us for more details.



ROOF FIXINGS


Landpower design and produce various roof clamp and fixings for various Corrugated,Trapezoidal metal/pvc roof, if you have specific metal/pvc roof shape, feel free to contact us, we are here to make customized solutions for you.


                         



GROUNDING SYSTEMS


The grounding systems include components like earthing lug, earthing clip and bonding jumper etc which makes the solar array more safe.



BENEFITS


1,Fast Installation.
The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and roof hook to guarantee a fast and easy installation process.
2, Flexible Application
The high range of engineered holding devices ensure the mounting structure accommodate most of trapezoidal sheet metal roofs. Both crystalline module and thin film module can easily be installed on most kind of metal roofs in landscape or portrait.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan:

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.


Project Reference(click here): Landpower PVC Corrugated Roof MW Project.


We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Angle Adjustable Tilt Mounting

Angle Adjustable Tilt Solar Racking System is specially designed for easy installation of solar panel to tilt a certain angle with the roof. The mounting system design provides a strong and sturdy support for solar modules, it can be a fixed angle or adjustable such as 10~15 degree, 15~30 degree and 30~60 degree for your requirement. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and highly pre-assembled tilt leg, This Metal Adjustable Tilt Solar Mounting makes the installation easy and quick to save your labor cost and time.

TECHNICAL INFORMATION
Install site :Low profile Roof or flat roof
Tilt Angle :10~60 degree
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Anticorrosive: Anodized aluminum & stainless steel
Color: Natural and Customized
Warranty:Ten years warranty and twenty years’ service life



COMPONENT OVERVIEW


Landpower carries many Components for Adjustable Tilt Solar Racking solutions,here are some main components:


  • Overview




  • Components

                                        

         Roof Rail                       Mid Clamp                End Clamp                    Front Foot            Adjustable Rear Foot



INSTALLATION DEMONSTRATION





Please click Landpower Adjustable Tilt Solar Mounting for concrete project for your reference!!!


BENEFITS

1, Fast Installation
The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and tilt leg to ensure a fast and easy installation process.
2, Flexible Application
With adjustable tilt angles from 10°-60° this mounting system can easily tilt a ideal certain angle with roof, it provides excellent adaptability not only to a wide range of flat roof PV mounting projects but also some sloped roof solar mounting projects.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.


We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

More >>

Shingle Roof Mounting

Landpower Shingle Roof Solar Mounting System is especially engineered for asphalt shingle roof. It highlight the component of universal PV Roof Flashing which is water tight and durable and compatible for most of roof racking. Using our innovative Rail and pre-assembled components like tilt-in T module, clamp kit and PV mount flashing, our Shingle Roof Mounting is not only making the module installation easy and save time but also minimizing damage to the roof. 

TECHNICAL INFORMATION
Install site :Shingle Roof                                           
Tilt Angle :Flushed with the roof (10~60 deg)
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Color: Natural or Customized
Anticorrosive: anodized aluminum & stainless steel

Warranty:Ten years warranty and twenty- year service life


COMPONENT OVERVIEW


Our PV Flashing is engineered and designed for fast installation. it is water tight and durable for any composite. This PV Flashing kit is compatible for most of solar racking, the main components are below: 


                          

          PV Flashing                           AL Base               L-Bracket           Standoff               Hex Cap          Lag Bolt



BENEFITS
1, Fast Installation

Coming with PV mount flashing, there’s no need for trimming shingles, just drill one hole into rafter backfilling sealant and slide the PV flashing beneath shingle, drive the bolt home, and it is done. The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and L bracket to guarantee a fast and easy installation process.
2, Save Application
Equip with PV flash, there's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.


We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.


More >>

Trapezoidal Roof Mounting

Landpower Trapezoidal Roof Mounting is designed for Trapezoidal Sheet metal Roof, we are offering various mounting solutons for different condictions, L Bractet or hager bolt for metal and wooden purlins, Mini rail or U rail for lower wind locations installation, Trapezoidal Roof clamping systems for windy and water-proof  installations.We design specific solutions based on solar panel orientaion,wind load/snow load, roof conditions etc our concept is to design most suitable solutions for your Trapezoidal Roof.


TECHNICAL INFORMATION
Install site :Trapezoidal Sheet Metal
Tilt Angle :Flushed with the roof (10~60 deg)
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Color: Natural or Customized
Anticorrosive: anodized aluminum & stainless steel
Warranty:Ten years warranty and twenty- year service life


Landpower Trapezoidal Roof Mounting are suiable for below roof sheet:




To know which solutions better to your trapezoidal  metal sheet roof, it is better to let us know above information of A,B,C and Points.We design vaious trapezoidal roof attachments,please feel free to email  us your roof infomatin.




Trapezoidal Roof Clamping Systems:


                                                                 (Stainless Steel Clamping Systems)


                                                                 (Aluminium Clamping Systems)




Trapezoidal Roof L-Feet(L-Bracket) and Hanger Bolt Systems:



                                                                 (L feet and Hanger Bolt Systems)



Trapezoidal Roof Mounting --Mini Rail Systems


                              (Mini Rail Mounting Systems,mostly suitable for Portrait Orientation)





Trapezoidal Roof Mounting --U Rail Systems



                                      (U Rail Mounting Systems,mostly suitable for Landscape Orientation)


Project Reference(click here): Landpower Trapezoidal Sheet Metal Roof MW Project


We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.

Installation Video Reference:

More >>

Trapezoidal Roof Mini Rail System

Landpower Mini Rail Trapezoidal Roof Mounting is specially designed for solar panel portrait orientation installation in lower wind load location. It just consists of three components Mid Clamp,End Clamp, and Mini Rail , it is economic and simple solution for Trapezoidal sheet metal roofs.


TECHNICAL INFORMATION
Install site :Trapezoidal Sheet Metal
Tilt Angle :Flushed with the roof (10~60 deg)
Building Height:20 m
Max Wind Speed:<60m/s
Snow Load:<1.4KN/m2
Standard :AS/NZS 1170 and other international Standard
Material :High Class Aluminum alloy Al6005-T5& Stainless steel 304
Color: Natural or Customized
Anticorrosive: anodized aluminum & stainless steel
Warranty:Ten years warranty and twenty- year service life


Landpower Trapezoidal Roof Mounting are suiable for below roof sheet:







Mini Rail is easy to fix on roof, the length of  Mini Rail depends on the distance between ridges, therefore,it is better to let us know information of D Points.



INSTALLATION:













We engineer and design Solar Racking/Mounting Hardware for specific solar projects, there may not list all the
details of racking in the web,therefore,please don't hesitate to contact us for more details for your specific projects.


Installation Video Reference:


More >>

Interested?

Please don't hesitate to leave a message and we'll get back to you soon.


Required Fields *

First Name: *
Your name: *
Company:
Email: *
Phone: *
Address:
Content: *
ValidCode:
*