Landpower Aluminium Portrait Ground Mounting System (Almost 100% of solar rack components are made of Aluminum ) is equipped with components which made of aluminum for mounting on concrete strip foundations or ground screw. This system highlight quick installation, delivered by preassembled parts, it highly minimized the installation processes. It provides a strong and sturdy mounting structure that is suitable for use in high wind and snow load environments.

TECHNICAL INFORMATION                                                                                
Installation Site:   Open field
Wind Load:   Up to 60m/s
Snow Load:   1.4KN/m
Applicable Module:   Framed or Frameless

Module Orientation:   Portrait 

Foundation:  Ground Screw or Concrete

Main Material:   100% Anodized Aluminum
Fastener Material:   Stainless Steel 
Warranty：Ten years warranty and twenty years’ service life.

COMPONENT OVERVIEW

The Components of this systems is highly pre-assembled as blow:

  *Ground Screw: Landpower engineer various Ground Screws for different soil conditions; 

  *The Pre-assembled Support: The Ground Mounting Supports come with pre-assembled,

    please see unfold support below:

INSTALLATION

It is quite easy to install this Ground Mounting Systems due to the most of parts are highly pre-assembled, 

especially the Ground Mounting Support: 

FOUNDATION OPTION

                                          (Ground Screw Foundation)                                                 (Concrete Foundation)

BENEFITS

1, Fast Installation
Most of parts is pre-assembled, especially the supporting leg, together with feature of tilt-in T module design, the system dramatically reduce the installation processes onsite.
2, Flexible Application
This system not only can be installed on ground screw for standard circumstance but also installed on concrete foundation for tricky terrain like soft or rocky ground.
3, Economical
The mounting structure is a cost effective mounting solution. Long rail spans reduces the number of necessary supports and foundations, which also reduces the material cost. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty.

Please click here for the PROJECT REFERENCE!!!

Landpower Aluminium Landscape Ground Mounting System (Almost 100% of solar rack components are made of Aluminum ) is equipped with components which made of aluminum for mounting on concrete strip foundations or ground screw. This system highlight quick installation, delivered by preassembled parts, it highly minimized the installation processes. It provides a strong and sturdy mounting structure that is suitable for use in high wind and snow load environments.

TECHNICAL INFORMATION                                                                                
Installation Site:   Open field
Wind Load:   Up to 60m/s
Snow Load:   1.4KN/m
Applicable Module:   Framed or Frameless

Module Orientation:  Landscape

Foundation:  Ground Screw or Concrete

Main Material:   100% Anodized Aluminum
Fastener Material:   Stainless Steel  
Warranty：Ten years warranty and twenty years’ service life.

COMPONENT OVERVIEW

The Components of this systems is highly pre-assembled as blow:

  *Ground Screw: Landpower engineer various Ground Screws for different soil conditions; 

  *The Pre-assembled Support: The Ground Mounting Supports come with pre-assembled,

    please see unfold support below:

INSTALLATION

It is quite easy to install this Ground Mounting Systems due to the most of parts are highly pre-assembled,

especially the Ground Mounting Support: 

     

                                                                       (Unfolded Ground Mounting Support)

FOUNDATION OPTIONS

                               (Ground Screw Foundation)                                                 (Concrete Foundation)

BENEFITS

1, Fast Installation
Most of parts is pre-assembled, especially the supporting leg, together with feature of tilt-in T module design, the system dramatically reduce the installation processes onsite.
2, Flexible Application
This system not only can be installed on ground screw for standard circumstance but also installed on concrete foundation for tricky terrain like soft or rocky ground.
3, Economical
The mounting structure is a cost effective mounting solution. Long rail spans reduces the number of necessary supports and foundations, which also reduces the material cost. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high anodized aluminum alloy, their high resistance to corrosion and complete recyclability, they are designed for twenty-year service life and backed by ten years warranty.

Please click there for the PROJECT REFERENCE!!!

Landpower Steel-Strong Solar Ground Mounting System is applicable to a large array photovoltaic system in open terrain. This system is designed to engineer with a minimum amount of installed footing at greatly reduces labor. As the difference foundation solutions, such as concrete with pre-buried bolt, direct buried and ground screw, the system can be modified to be installed. The special tilt-in module, the clamp and the U-bolt make the installation easy and quick. The customized length can eliminate the weld and cut onsite to keep the high anticorrosive performance, the structure strength and the appearance.
 
TECHNICAL INFORMATION
Install site：Open ground
Tilt Angle：10~60deg
System Height：<2.5m
Max Wind Speed：<60m/s
Snow Load：<1.4KN/㎡
Standard：AS/NZS 1170 and other international Standard
Material：Aluminum alloy Al6005-T5& Stainless steel 304 & Hot galvanized steel
Anticorrosive：Anodized & Hot galvanized
Color：Natural or Optional
Warranty：Ten years warranty and up twenty years service life

BENEFITS

1, Fast Installation
The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and L bracket ensure a fast and easy installation process.
2, Stand up to extreme weather
The PV mounting system is designed to stand up to the extreme weather complied with international structure load standard by the skilled engineer. The main support components also have been test to guarantee. Its structure and load-carrying capacity.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.

All mounting structural components are made of high class hot-galvanized Q235 steel and anodized aluminum components, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.

Pile Ramming Video (Demonstration):

There are just seconds to ram a pile,quite fast to install the solar farm!

Landpower Solar Pole Ground Mounting System is ideal for installation with little space,when shading is an issue, it is also applicable to a large array photovoltaic system in open terrain. This system is designed for seasonal adjustability which can be operated by a single person,this allows the system to quickly make seasonal adjustments to gain all the efficiency and power production of a motorized tracker without the added expense.
 
TECHNICAL INFORMATION
Install site：Open ground
Adjustable Angle：10,20,30,40 degrees(adjustable)
System Height：<2.5m
Max Wind Speed：<60m/s
Snow Load：<1.4KN/㎡
Standard：AS/NZS 1170 and other international Standard
Material：Aluminum alloy Al6005-T5& Stainless steel 304 & Hot galvanized steel
Anticorrosive：Anodized & Hot galvanized
Color：Natural or Optional
Warranty：Ten years warranty and up twenty years service life

BENEFITS

1, Fast Installation
The tilt-in T module can be put into the extruded rail from the any location and can be highly pre-assembled with the clamp and L bracket ensure a fast and easy installation process.
2, Stand up to extreme weather
The PV mounting system is designed to stand up to the extreme weather complied with international structure load standard by the skilled engineer. The main support components also have been test to guarantee. Its structure and load-carrying capacity.
3, Economical
The mounting structure is a cost effective mounting solution. The quantity of components can be required and sold according to project specific calculations. The various components can be kept in stock to shorten time between planning and installation.
4, Long lifespan

All mounting structural components are made of high class stainless steel and anodized aluminum alloy, their high resistance to corrosion and they are designed for twenty-year service life and backed by ten years warranty.

Landpower Solar Angle Manually Adjustable Ground Mounting System is easy and cost effective mounting system

 for angle adjustability which can increase the power output up to 15%. Just only need one person to take one 

minute to adjust your ideal angle(from 0- 60 degree). it is easily to achieve changing the angle by one tool of Handle with torque less than 10 N.m.   

 

TECHNICAL INFORMATION

Install Site: Open Ground/Flat Roof

Adjustable Angle:0-60 degree

No. Of Person to Adjust one array: 1 Person

Time to Adjust Angles:1 Minute

Adjusting Torque: <10N.m

Max Wind Speed:< 50m/s

Snow Load:<1.2KN/M2 

Standard:JIS C8955/C8956-2017, GB 50009-2012

                AS/NZS 1170,Euro Code 8,DIN 1055,IBC 2006

Material:Aluminum+Hot Galvanized Steel

Warranty:Ten years with twenty year lifespan

                                                                (Angle Manually Adjustable Ground Mounting)  

        

                                                                (  Angle Manually Adjustable Ground Mounting  )

                                                   (  Angle Manually Adjustable Ground Mounting  )

INSTALLATION DEMONSTATION